Contact Us

Contact number:

+86-351-8333656

+8615135164368

(Ms. Ma)

Information Details

Safety requirements for coke ovens


Summary:

What are the requirements for the safety of the coke oven, the following by the relevant personnel of the coke oven manufacturer to introduce:

What are the requirements for the safety of coke ovens, the followingCoke oven manufacturersRelevant personnel to introduce:

1 The surface of the coke oven top shall be smooth, and the longitudinal and transverse strips shall not protrude from the surface.

2 Coke oven should adopt water seal type rising pipe cover, heat insulation furnace cover and other measures.

3 The top of the boiler end table shall be provided with operator rest room.

4 no vaporization cooling of the rising pipe, must be set up heat baffle or take other insulation measures.

5 The design, manufacture, construction, acceptance and management of the riser vaporization cooling device and its accessories shall comply with the relevant provisions of the Steam Boiler Safety and Technical Supervision Regulations.

6 When the water jacket of the rising pipe vaporization cooling device is short of water, it must be cooled by steam before water can be delivered.

7 Coke oven should adopt double gas collecting pipe. Fireshield should be set at the lower part of the cross pipe section facing the riser pipe mouth.

8 The release pipe of the gas gathering pipe shall be more than 5m higher than the walking platform, and its opening and closing shall be able to be carried out on the gas gathering pipe walking platform.

9 The gathering pipe shall be provided with industrial water pipes for accidents, and the upper part of the operating platform shall be provided with cleaning holes.

10 It is forbidden to clean the gas collector within 5m from the carbonization chamber where the riser cover is opened.

If you need a coke oven, we have a variety here.Type of coke oven, need which one can contact us!

Key words:

Metallurgical

Zhongke

Related News